Elements and technical features » History » Version 13

Version 12 (HAENNIG, Gerald, 12/15/2015 07:27 AM) → Version 13/35 (HAENNIG, Gerald, 12/15/2015 07:30 AM)

h1. 2.1 Elements

p=. !{width:700px}bloc_diagram.png!
Figure 1. Optical Link (cable loss removed).



On optical link consists of :
* an optical transmitter ; it modulates input RF signal onto the optical wavelength intensity.
Optical intensity is varied either directly by varying Laser Diode current or indirectly through a Mach-Zehnder Modulator modulating a constant laser source.
* fiber optic : in general, monomode fiber optic is used to avoid dispersion especially for long link. Morever, wavelengths around 1300 nm are used as dispersion is minimum in this region.
* an optical receiver : it is based on a photodectector. It detects RF modulation on the optical wavelength and outputs the RF signal.

The main parameters for an optical link are gain, bandwidth, Noise Figure (NF) and Spurious Free Dynamic Range (SFDR).

MITEQ, Fiber optic products : https://www.miteq.com/docs/MITEQ_FiberOptic_c40.pdf

Earth stations are based on an indoor/outdoor unit architecture. In our system we will count on:

* Outdoor: L-band reception antenna, the coaxial cable relying the antenna and the modulator transmitter (allows to convert from L-band to optic frequencies) and the 30m of Monomode FO.
* Indoor: consists of the receiver L-band/optic demodulator and the coaxial cable to rely the demodulator with the TV.

!schema.jpg!