Main Parameters » History » Version 30

HAENNIG, Gerald, 12/14/2015 10:55 AM

1 2 HAENNIG, Gerald
{{toc}}
2 1 HAENNIG, Gerald
3 6 HAENNIG, Gerald
h1. 2.3 Main Parameters 
4 1 HAENNIG, Gerald
5 4 HAENNIG, Gerald
This part lists the main specifications and highlights the main parameters to compare an optical link with a coaxial cable
6 3 HAENNIG, Gerald
7 2 HAENNIG, Gerald
h2. 2.3.1 Optical link
8 3 HAENNIG, Gerald
9 3 HAENNIG, Gerald
The optical link consists of :
10 24 HAENNIG, Gerald
* Optical transmitter OTX1910 from the manufacturer lynx-technik : it modulates the intensity of the optical 1320 nm wavelength with the RF input signal ;
11 3 HAENNIG, Gerald
* Monomode fiber 9/125 OS2 (to avoid dispersion effect) to optical signal on a distance up to 10 kilometers ;
12 25 HAENNIG, Gerald
* Optical Receiver ORX1900 from the manufacturer lynx-technik : it detects optical wavelength intensity modulation and outputs the RF modulating signal.
13 1 HAENNIG, Gerald
14 12 HAENNIG, Gerald
*Optical transmitter OTX1910*
15 12 HAENNIG, Gerald
16 30 HAENNIG, Gerald
p=. !{width:700px}IMD_700MHz.png!
17 30 HAENNIG, Gerald
Figure 4. 3rd order Intermodulation vs Input Power @ 700 MHz
18 30 HAENNIG, Gerald
19 1 HAENNIG, Gerald
|_. Optical transmitter OTX1910	|_. min	|_. typ	|_. max	|_. Unit |_. comments |
20 12 HAENNIG, Gerald
|Supply |=. 9 |=. 12 |=. 14 |=. V |=.  |
21 12 HAENNIG, Gerald
|Current consumption |=. - |=. - |=. 450 |=. mA |=.  |
22 12 HAENNIG, Gerald
|RF Input Connector |\3=. 75 Ohm F-type |=.  |=.  |
23 12 HAENNIG, Gerald
|RF Return Loss |=. 14 |=. - |=. - |=. dB |=. |
24 1 HAENNIG, Gerald
|RF Maximum Input Level |=. - |=. - |=. 15 |=. dBm |=.  |
25 1 HAENNIG, Gerald
|RF Input Dynamic Range |=. -65 |=. - |=. -10 |=. dBm |=.  |
26 1 HAENNIG, Gerald
|RF Input Frequency |=. 700 |=. - |=. 2300 |=. MHz |=.  |
27 1 HAENNIG, Gerald
|Optical Connecctor |\3=. LC/PC single mode |=.  |=.  |
28 12 HAENNIG, Gerald
|Optical signal wavelength |=. - |=. 1310 |=. - |=. nm |=.  |
29 12 HAENNIG, Gerald
|Optical power level |=. - |=. 1 |=. - |=. dBm |=.  |
30 12 HAENNIG, Gerald
31 12 HAENNIG, Gerald
*Fiber Monomode 9/125 OS2 (G.652.D ITU-T compliant), low dispersion at 1320 nm*
32 12 HAENNIG, Gerald
33 12 HAENNIG, Gerald
|_. Fiber Optic |_. min	|_. typ	|_. max	|_. Unit |_. comments |
34 12 HAENNIG, Gerald
| Optical Loss  |=. - |=. 0.3 |=. - |=. dB/km |=. 1320 nm |
35 2 HAENNIG, Gerald
36 13 HAENNIG, Gerald
*Optical receiver  ORX1900*
37 13 HAENNIG, Gerald
38 13 HAENNIG, Gerald
|_. Optical receiver  ORX1900 |_. min	|_. typ	|_. max	|_. Unit |_. comments |
39 13 HAENNIG, Gerald
|Supply |=. 9 |=. 12 |=. 14 |=. V |=.  |
40 14 HAENNIG, Gerald
|Current consumption |=. - |=. 240 |=. - |=. mA |=. |
41 13 HAENNIG, Gerald
|Optical Input Connector |\3=. LC/PC single mode |=.  |=.  |
42 15 HAENNIG, Gerald
|Optical input  signal wavelength range |=. 1270 |=. 1310 |=. 1610 |=. nm |=.  |
43 15 HAENNIG, Gerald
|Optical input signal level range |=. -6 |=. - |=. 4 |=. dBm |=.  |
44 14 HAENNIG, Gerald
|RF Output  Connector |\3=. 75 Ohm F-type |=.  |=.  |
45 14 HAENNIG, Gerald
|RF Input Frequency |=. 700 |=. - |=. 2300 |=. MHz |=.  |
46 13 HAENNIG, Gerald
47 1 HAENNIG, Gerald
*Overall Optical link with fiber length of 1 m*
48 25 HAENNIG, Gerald
49 26 HAENNIG, Gerald
Lynx-technik technical provided us more technical specifications about the optical link. 
50 25 HAENNIG, Gerald
51 26 HAENNIG, Gerald
However, they do have any phase noise measurements.
52 16 HAENNIG, Gerald
53 16 HAENNIG, Gerald
|_. Optical link with fiber length of 1 m |_. min	|_. typ	|_. max	|_. Unit |_. comments |
54 16 HAENNIG, Gerald
|Noise Figure |=. - |=. - |=. 31 |=. dB |=.  |
55 17 HAENNIG, Gerald
|Carrier to Noise Ratio |=. 55 |=. - |=. - |=. dB |=. Pin=-13 dBm, Fiber=1 m |
56 16 HAENNIG, Gerald
|SFDR |=. 102 |=. - |=. - |=. dB/Hz2/3 |=. Pin=-13 dBm, IM3=50 dBc|
57 16 HAENNIG, Gerald
|IIP3 |=. 12 | - |=. - |=. dBm |=. Pin=-13 dBm, IM3=50 dBc|
58 16 HAENNIG, Gerald
59 18 HAENNIG, Gerald
h2. 2.3.2 Coaxial cable 
60 16 HAENNIG, Gerald
61 18 HAENNIG, Gerald
*The optical link is a replacement of a coaxial cable EN50117-6 11PATC/PH 1.7/6.9 Class A 3GHz (B93) 17/13 139m.* 
62 2 HAENNIG, Gerald
63 18 HAENNIG, Gerald
|_. COAXIAL CABLE |_. min	|_. typ	|_. max	|_. Unit |_. comments |
64 21 HAENNIG, Gerald
|/12. RF Loss @ 20°C |=. - |=. 0.9 |=. - |/12. dB/100m |=. 5 MHz |
65 18 HAENNIG, Gerald
| - |=. 2.7 |=. - |=. 50 MHz |
66 18 HAENNIG, Gerald
| - |=. 3.8 |=. - |=. 100 MHz |
67 20 HAENNIG, Gerald
| - |=. 5.4 |=. - |=. 200 MHz |
68 20 HAENNIG, Gerald
| - |=. 7.7 |=. - |=.400 MHz |
69 20 HAENNIG, Gerald
| - |=. 11 |=.-	|=. 800 MHz |
70 20 HAENNIG, Gerald
| - |=. 11.5 |=. - |=. 862 MHz |
71 20 HAENNIG, Gerald
| - |=. 12.1 |=. - |=. 950 MHz |
72 20 HAENNIG, Gerald
| - |=. 14.6 |=. - |=. 1350 MHz |
73 20 HAENNIG, Gerald
| - |=. 16.7 |=. - |=. 1750 MHz |
74 20 HAENNIG, Gerald
| - |=. 18.7 |=. - |=. 2150 MHz |
75 20 HAENNIG, Gerald
| - |=. 22.3 |=. - |=. 3000 MHz |
76 1 HAENNIG, Gerald
| IIP3 |=. 50 |=. - |=. - |=. dBm |=. Estimation |
77 23 HAENNIG, Gerald
78 1 HAENNIG, Gerald
IIP3 is only an estimation to be compared with optical link : this value is deemed quite conservative due to the fact the cable is a passive component.
79 24 HAENNIG, Gerald
80 24 HAENNIG, Gerald
h2. 2.4 References
81 24 HAENNIG, Gerald
82 28 HAENNIG, Gerald
lynx-technik web site : http://www.lynx-technik.com/en/home/
83 29 HAENNIG, Gerald
Latest OTX1910 transmitter datasheet : http://media.lynx-technik.de/uploads/tx_lynx/product/pdf/OTX1910-rev3.pdf
84 29 HAENNIG, Gerald
Latest ORX1900 receiver datasheet : http://media.lynx-technik.de/uploads/tx_lynx/product/pdf/ORX1900-rev3.pdf