SOURCEFORGE » RALF » 2015 Evaluation and test of an optical / L-band tranceiver

{{toc}}

h1. 2.3 Main Parameters 

This part lists the main specifications and highlights the main parameters to compare an optical link with a coaxial cable

h2. 2.3.1 Optical link

The optical link consists of :

* Optical transmitter OTX1910 : it modulates the intensity of the optical 1320 nm wavelength with the RF input signal ;

* Monomode fiber 9/125 OS2 (to avoid dispersion effect) to optical signal on a distance up to 10 kilometers ;

* Optical Receiver ORX1900 : it detects optical wavelength intensity modulation and outputs the RF modulating signal.

|_. Parameter |_. Unit |\5=.*Measurements* |

|_. Frequency |_. MHz |=. 700 |=. 1000 |=. 1500 |=. 2000 |=. 2300 |

|_. Optical Link Noise Figure |_. dB |=. 30.9 |=. 30.1 |=. 31.3 |=. 32.6 |=. 33.4 |

|_. Optical transmitter OTX1910	|_. min	|_. typ	|_. max	|_. Unit |_. comments |

| Supply |=. 9 |=. 12 |=. 14 |=. V |=.  |	

| Current consumption |=. - |=. - |=. 450 |=. mA |=.  |

| RF Input Connector |\3=. 75 Ohm F-type |=.  |=.  |

RF Return Loss	14	-	-	dB	

RF Maximum Input Level	-	-	15	dBm	

RF Input Dynamic Range	-65	-	-10	dBm	

RF Input Frequency	700	-	2300	MHz	

Optical Connecctor	LC/PC single mode				

Optical signal wavelength	-	1310	-	nm	

Optical power level	-	1	-	dBm	

h2. 2.3.2 Coaxial cable