Noise Figure » History » Version 35

« Previous - Version 35/57 (diff) - Next » - Current version
HAENNIG, Gerald, 12/13/2015 04:15 PM


Noise Figure

The Noise Figure has been measured with the FSV spectrum Analyzer.

The optical link output power is measured with an input termination (done with 50 Ohm termination instead of 75 Ohm as not available) at a temperature of 290 K.

Noise Factor :

F = No / kToBG (No : measured output power noise; k : Boltzman constant ; To : ambiant temperature close to 290 K ; B : measurement bandwidth ; G : RF Gain)

Noise Figure :

NF=10*log10(Ftot)

The table below contains the Noise Figure measured on the optical link.

Frequency Optical Link Noise Figure
MHz dB
700 30.9
1000 30.1
1500 31.3
2000 32.6
2300 33.4
Parameter Unit Measurements
Frequency MHz 700 1000 1500 2000 2300
Optical Link Noise Figure dB 30.9 30.1 31.3 32.6 33.4