2 Simulation program » History » Version 36
Version 35 (MOURA, Ninon, 03/23/2016 09:53 AM) → Version 36/47 (MOURA, Ninon, 03/23/2016 09:54 AM)
h3. 2. Simulation program
h4. 2.1. Simulation
First simulation as been run without modem.
#Step 1.
Line commands to configure the PC engines are described in part II.3. It it must be done for both PC engines. ngines.
SEE config PC engines 2.3
Step 1.
On user interface only.
#Step Step 4. Addition of space delay to user interface (p5p1)
@tc qdisc add dev p5p1 root netem delay 300ms @
#Step Step 5. Test connection and delay from 192.168.2.1 to 192.168.3.1
@ping 192.168.3.1 -I 192.168.2.1@
#Step Step 6. Implementation of routing rules in order to use PEPSal. Indeed PEPSal uses port 5000, consequently TCP flow must be redirected on this port.
@
iptables -t mangle -A PREROUTING -s 192.168.2.1 --proto tcp --tcp-flags ALL SYN -j QUEUE
iptables -t nat -A PREROUTING -s 192.168.2.1 --proto tcp -j REDIRECT --to-port 5000
iptables -t mangle -A PREROUTING -d 192.168.2.1 --proto tcp --tcp-flags ALL SYN -j QUEUE
iptables -t nat -A PREROUTING -d 192.168.2.1 --proto tcp -j REDIRECT --to-port 5000
@
Display all rules to verify
@iptables -t mangle -t nat -L@
Step 7 Execution of PEPSal on port
@pepsal -a 192.168.2.1@
Then a TCP flow is simulated thanks to the iperf command.
h4. 2.2. Post processing
In order to get information on TCP packets, the tcpdump commmand is executed. The save option is run and data are collected in a file.pcap.
Command is:
@tcpdump tcp -w fileName.pcap@
Files transfert from PC engine right to local computer as following:
@ scp labo@192.168.0.201:Proj3/*. @
The file generated by tcpdump command is compatibile with wireshark. Wireshark is a free network protocol analyzer. It lets you see what's happening on your network at a microscopic level. Thanks to this tool, we could compare with and without PEPSal:
* throughput,
* sequence number packets,
* windows size evolution.
Tests in terms of quality of usage, such as download a web browser, were planed. However due to difficulties in network configuration, those tests will not be run.
h4. 2.1. Simulation
First simulation as been run without modem.
#Step 1.
Line commands to configure the PC engines are described in part II.3. It it must be done for both PC engines. ngines.
SEE config PC engines 2.3
Step 1.
On user interface only.
#Step Step 4. Addition of space delay to user interface (p5p1)
@tc qdisc add dev p5p1 root netem delay 300ms @
#Step Step 5. Test connection and delay from 192.168.2.1 to 192.168.3.1
@ping 192.168.3.1 -I 192.168.2.1@
#Step Step 6. Implementation of routing rules in order to use PEPSal. Indeed PEPSal uses port 5000, consequently TCP flow must be redirected on this port.
@
iptables -t mangle -A PREROUTING -s 192.168.2.1 --proto tcp --tcp-flags ALL SYN -j QUEUE
iptables -t nat -A PREROUTING -s 192.168.2.1 --proto tcp -j REDIRECT --to-port 5000
iptables -t mangle -A PREROUTING -d 192.168.2.1 --proto tcp --tcp-flags ALL SYN -j QUEUE
iptables -t nat -A PREROUTING -d 192.168.2.1 --proto tcp -j REDIRECT --to-port 5000
@
Display all rules to verify
@iptables -t mangle -t nat -L@
Step 7 Execution of PEPSal on port
@pepsal -a 192.168.2.1@
Then a TCP flow is simulated thanks to the iperf command.
h4. 2.2. Post processing
In order to get information on TCP packets, the tcpdump commmand is executed. The save option is run and data are collected in a file.pcap.
Command is:
@tcpdump tcp -w fileName.pcap@
Files transfert from PC engine right to local computer as following:
@ scp labo@192.168.0.201:Proj3/*. @
The file generated by tcpdump command is compatibile with wireshark. Wireshark is a free network protocol analyzer. It lets you see what's happening on your network at a microscopic level. Thanks to this tool, we could compare with and without PEPSal:
* throughput,
* sequence number packets,
* windows size evolution.
Tests in terms of quality of usage, such as download a web browser, were planed. However due to difficulties in network configuration, those tests will not be run.