BOM » History » Version 4
AGUT SANZ, Sergio, 03/23/2015 01:38 AM
| 1 | 4 | AGUT SANZ, Sergio | h1. 6.4 BOM |
|---|---|---|---|
| 2 | 1 | AGUT SANZ, Sergio | |
| 3 | 1 | AGUT SANZ, Sergio | {TODO} |
| 4 | 1 | AGUT SANZ, Sergio | |
| 5 | 1 | AGUT SANZ, Sergio | The complete bill of materials for the construction is explained in this section: |
| 6 | 1 | AGUT SANZ, Sergio | |
| 7 | 1 | AGUT SANZ, Sergio | The following materials are readily available in any home improvement supermarket with a plumbing section. The metal rods, can be made of copper or any other conductive material, however in this project aluminium rods have been used because of their good conductive properties. Once the antenna was built, a female connector, PL 259, was used to connect the antenna output with the receptor. Regarding the connections, a strip board was used to ensure a better connection between both parts and to fasten the rods correctly. The list of materials can be seen in table xx below: |
| 8 | 1 | AGUT SANZ, Sergio | |
| 9 | 1 | AGUT SANZ, Sergio | |
| 10 | 1 | AGUT SANZ, Sergio | |
| 11 | 1 | AGUT SANZ, Sergio | |
| 12 | 1 | AGUT SANZ, Sergio | |
| 13 | 2 | AGUT SANZ, Sergio | {TODO} TABLE, ITS REFERENCE |
| 14 | 1 | AGUT SANZ, Sergio | |
| 15 | 3 | AGUT SANZ, Sergio | p=. !{width: 60%}BOM.png! |
| 16 | 3 | AGUT SANZ, Sergio | *Figure *: Complete list of materials |
| 17 | 3 | AGUT SANZ, Sergio | |
| 18 | 3 | AGUT SANZ, Sergio | |
| 19 | 1 | AGUT SANZ, Sergio | |
| 20 | 2 | AGUT SANZ, Sergio | p=. !{width: 60%}Material.png! |
| 21 | 2 | AGUT SANZ, Sergio | *Figure *: All material used in our design |
| 22 | 1 | AGUT SANZ, Sergio | |
| 23 | 1 | AGUT SANZ, Sergio | |
| 24 | 1 | AGUT SANZ, Sergio | In addition, the list of tools used in the construction of the antenna are the following: |
| 25 | 1 | AGUT SANZ, Sergio | > * Soldering |
| 26 | 1 | AGUT SANZ, Sergio | > * Cable stripping tool |
| 27 | 1 | AGUT SANZ, Sergio | > * Hacksaw |
| 28 | 1 | AGUT SANZ, Sergio | > * Drill 6mm, 2mm |
| 29 | 1 | AGUT SANZ, Sergio | > * Rasp |
| 30 | 1 | AGUT SANZ, Sergio | |
| 31 | 1 | AGUT SANZ, Sergio | |
| 32 | 1 | AGUT SANZ, Sergio | To complete the system, the following elements were necessary to collect the data: |
| 33 | 1 | AGUT SANZ, Sergio | > * Analog receiver |
| 34 | 1 | AGUT SANZ, Sergio | > * Cable with jack connection |
| 35 | 1 | AGUT SANZ, Sergio | > * Software: WXtolmg and WXTrack |