Introduction » History » Version 2

AUGER, Anne sophie, 03/23/2015 09:06 AM

1 1 AUGER, Anne sophie
h1. Introduction
2 1 AUGER, Anne sophie
3 1 AUGER, Anne sophie
The aim of this project is the design of a Telemetry and Telecommand (TM/TC) link between small aircrafts (ie TB20) and an antenna on top of ISAE building. There are different aspects in this work: 
4 1 AUGER, Anne sophie
* regulatory aspects : we must pay for rights of emission on a given frequency band
5 1 AUGER, Anne sophie
* link budget aspects : some parameters can be adjusted to reach the wanted performance
6 1 AUGER, Anne sophie
* flight constraints have to be considered in the choice of the equipment to allow a full time link
7 1 AUGER, Anne sophie
8 2 AUGER, Anne sophie
p=. !Slide1.jpeg!
9 1 AUGER, Anne sophie
10 1 AUGER, Anne sophie
To summarize the system design constraints, we can fill the mission statement below:
11 1 AUGER, Anne sophie
12 2 AUGER, Anne sophie
p=. !cahier_des_charges.png!
13 1 AUGER, Anne sophie
14 1 AUGER, Anne sophie
In order to define the video bit rate required for our application, knowing the aspect ratio (AR=1,78) quality of the encoded video (L=720p) and its frame cadence (FPS=12), we used the following formula:
15 1 AUGER, Anne sophie
16 1 AUGER, Anne sophie
p=. Bit rate = FPS*5,0692 * L ^1,391^ /(1000*AR) 
17 1 AUGER, Anne sophie
18 1 AUGER, Anne sophie
So 
19 1 AUGER, Anne sophie
20 1 AUGER, Anne sophie
p=. *Bit rate=322 Kbps*
21 1 AUGER, Anne sophie
22 1 AUGER, Anne sophie
As the link will allow data and video transmission, we choose to use the MPEG4 packet format, adapted for multiplexing different nature content. Therefore, we have to consider extra bits due to the encapsulation of data in MPEG4 frames, and we decide to define a bit rate of 500 kbps.