SOURCEFORGE » RALF » 2014 Dimensioning and budgeting of TM/TC link

h1. Simulations and results

From the method described previously, we have developed three Matlab programs enabling to compute or visualize the influence of various parameters according to what is assume known or not. 

h2. Computation of the MODCOD and (G/T) required:

Supposing that the specifications and frequency band are known (Rb, R, f, B and EIRP are known), we directly get all the parameters for the system design by following the method described previously.

For:	f= 869,5 MHz	  B= 250 kHz	PAR= 0.5 W	Rb=500 bits/s	  R=50 km:

Figure

Comment value (G/T)

For:	f= 5 GHz	  B= 500 kHz	EIRP= 1 W	Rb=500 bits/s	  R=50 km:

Figure

Comment value (G/T)

h2. Influence of the bandwidth on the EIRP:

If the regulatory frequency for application is known, this tool enables to visualize the tradeoff between the EIRP and bandwidth to fulfil the specifications:

For:	f= 869,5 MHz	  Rb=500 bits/s       R=50 km:

Figure

Comments

For:	f= 5 GHz          Rb=500 bits/s       R=50 km:

Figure

Comments

h2. Influence of the distance on the bite rate:

  If the required system design is too constraining for a given specification, and then not achievable, we might lower our expectations and have a tradeoff between the desired bit rate and the range

For:	f= 869,5 MHz	B= 250 kHz	PAR= 0.5 W

Figure

For:	f= 5 GHz	B= 500kHz	EIRP= 1 W

Figure

We can notice the bite rate is dropping quickly with the range of transmission. Then, the video transmission can be lost if the aircraft moves just a little bit too far of the limit range.