Wiki » History » Version 11
Version 10 (AUGER, Anne sophie, 03/22/2015 11:18 AM) → Version 11/55 (AUGER, Anne sophie, 03/22/2015 11:34 AM)
h1. DESIGN OF A TM/TC LINK BETWEEN SMALL AIRCRAFT AND GROUND STATION
h2. WIKI TABLE OF CONTENTS
[[Research of a frequency band]]
h2. INTRODUCTION
The aim of this project is the design of a Telemetry and Telecommand (TM/TC) link between small aircrafts (ie TB20) and an antenna on top of ISAE building. There are different aspects in this work:
* regulatory aspects : we must pay for rights of emission on a given frequency band
* link budget aspects : some parameters can be adjusted to reach the wanted performance
* flight constraints have to be considered in the choice of the equipment to allow a full time link
To summarize the system design constraints, we can fill the mission statement below:
p=. !figure1.png!
In order to define the video bit rate required for our application, knowing the aspect ratio (AR=1,78) quality of the encoded video (L=720p) and its frame cadence (FPS=12), we used the following formula:
p=. Bit rate = FPS*5,0692 * L ^1,391^ /(1000*AR)
So
p=. *Bit rate=322 Kbps*
As the link will allow data and video transmission, we choose to use the MPEG4 packet format, adapted for multiplexing different nature content. Therefore, we have to consider extra bits due to the encapsulation of data in MPEG4 frames, and we decide to define a bit rate of 500 kbps.
h2. Research of a frequency band
h3. Issue of a free band
System constraints and variable
Simulation of the system performance
h2. WIKI TABLE OF CONTENTS
[[Research of a frequency band]]
h2. INTRODUCTION
The aim of this project is the design of a Telemetry and Telecommand (TM/TC) link between small aircrafts (ie TB20) and an antenna on top of ISAE building. There are different aspects in this work:
* regulatory aspects : we must pay for rights of emission on a given frequency band
* link budget aspects : some parameters can be adjusted to reach the wanted performance
* flight constraints have to be considered in the choice of the equipment to allow a full time link
To summarize the system design constraints, we can fill the mission statement below:
p=. !figure1.png!
In order to define the video bit rate required for our application, knowing the aspect ratio (AR=1,78) quality of the encoded video (L=720p) and its frame cadence (FPS=12), we used the following formula:
p=. Bit rate = FPS*5,0692 * L ^1,391^ /(1000*AR)
So
p=. *Bit rate=322 Kbps*
As the link will allow data and video transmission, we choose to use the MPEG4 packet format, adapted for multiplexing different nature content. Therefore, we have to consider extra bits due to the encapsulation of data in MPEG4 frames, and we decide to define a bit rate of 500 kbps.
h2. Research of a frequency band
h3. Issue of a free band
System constraints and variable
Simulation of the system performance