Conclusions » History » Version 11

PASCHOS, Alexandros, 03/23/2016 02:19 PM

1 10 PASCHOS, Alexandros
{{toc}}
2 10 PASCHOS, Alexandros
3 1 PASCHOS, Alexandros
h1. *6. Conclusions*
4 1 PASCHOS, Alexandros
5 8 PASCHOS, Alexandros
Limitations were encountered when reading files large files (over a MB). So different techniques had to be considered, either reading in packets or implementing queues in order to process the data.
6 11 PASCHOS, Alexandros
Another aspect of memory limitation had to be faced. Compiling the LabVIEW VI in myRIO over and over seemed to overflow the memory even though we had considered reseting myRIO with the appropriate module. Hardware resets were inevitable at certain points.
7 9 PASCHOS, Alexandros
 
8 1 PASCHOS, Alexandros
h2. *6.1 Further Improvements*
9 2 PASCHOS, Alexandros
10 9 PASCHOS, Alexandros
Improvements could be considered in synchronization, and more specifically in defining the maximums in the auto-correlation. Although the implementation of the square wave signal was implemented as described in APT theory there are still improvements to be done.
11 2 PASCHOS, Alexandros
12 2 PASCHOS, Alexandros
Another improvement could be a more dynamic implementation of the demodulation and the decoding process. Instead of storing the whole data in a matrix, it another approach would be to treat them as pre-defined data chunks. Since a synchronization waveform defines the start of a line like in Figure 6.1 a dynamic treatment of the signal can be implemented.
13 3 PASCHOS, Alexandros
14 5 PASCHOS, Alexandros
p=. !{width: 60%}https://sourceforge.isae.fr/attachments/download/2086/dynamicSynch.png(dynamicSynch)!
15 3 PASCHOS, Alexandros
_Figure 6.1 Dynamic Synch_