Methodology » History » Version 10

PASCHOS, Alexandros, 03/13/2016 06:30 PM

1 2 PASCHOS, Alexandros
h1. *3.1 Methodology*
2 3 PASCHOS, Alexandros
3 6 PASCHOS, Alexandros
The FM signal is demodulated to a 2400Hz audio signal (in wave format). The receiver is responsible for the demodulation of the FM carrier and the output of an AM sub-carrier with the information signal within containing the image data. Every half a second, a row of the image is transmitted. 
4 1 PASCHOS, Alexandros
5 5 PASCHOS, Alexandros
p=. !{width: 50%}https://sourceforge.isae.fr/attachments/download/1829/apt_format_2.jpg(APT Format)!
6 4 PASCHOS, Alexandros
_Figure 3.1 APT Frame Format_
7 4 PASCHOS, Alexandros
8 1 PASCHOS, Alexandros
h2. *3.1.1 AM Demodulation*
9 1 PASCHOS, Alexandros
10 6 PASCHOS, Alexandros
It is important to determine when each row starts for decoding the image. As said before every half of a second a row of the image is transmitted. But in each transmitted row (see Figure above) there are two different images. The first image is the one using the AVHRR visible frequencies (optical) and the second image is coming from the IR. In order to determine the beginning of each row of data for each (visible or IR) image the transmitted message signal contains a distinct syncronization pulse (see Figure 2.2 APT Synchronization).
11 6 PASCHOS, Alexandros
The signal’s cross correlation with the synchronization square waveform gives us the frequency (number of maximums) of the repeated signal, and therefore the start of each row.
12 6 PASCHOS, Alexandros
13 6 PASCHOS, Alexandros
An illustration of the implementation followed is shown in the next Figure.
14 6 PASCHOS, Alexandros
15 7 PASCHOS, Alexandros
p=. !{width: 50%}https://sourceforge.isae.fr/attachments/download/1830/noaa_process_1.png(Process Diagram 1)!
16 6 PASCHOS, Alexandros
_Figure 3.2 Implementation Diagram 1_
17 4 PASCHOS, Alexandros
18 8 PASCHOS, Alexandros
The implementation was done in LabVIEW and the procedure wil be explained step by step. First a Sound File Read is used to read the .wav files and the output was plotted to verify the known 2400 Hz signal.
19 8 PASCHOS, Alexandros
20 10 PASCHOS, Alexandros
p=. !{width: 20%}https://sourceforge.isae.fr/attachments/download/1832/psd.bmp(PSD)!
21 8 PASCHOS, Alexandros
_Figure 3.3 PSD_
22 8 PASCHOS, Alexandros
23 8 PASCHOS, Alexandros
By cross correlating the demodulated signal using MT Demodulate AM with the synchronization square wave we’ve obtained the following.
24 8 PASCHOS, Alexandros
25 9 PASCHOS, Alexandros
p=. !{width: 50%}https://sourceforge.isae.fr/attachments/download/1833/cross_correlation.bmp(Cross Correlation)!
26 8 PASCHOS, Alexandros
_Figure 3.3 Cross Correlation_
27 4 PASCHOS, Alexandros
28 4 PASCHOS, Alexandros
h2. *3.1.2 Image Decoding and Display*
29 4 PASCHOS, Alexandros
30 4 PASCHOS, Alexandros
h2. *3.1.3 Referenes*