SOURCEFORGE » RALF » 2015 Building blocks for a LEO ground station

h1. The Two-Lines Element

p=. !TLE.gif!

Two Lines Element

Once the orbit propagator is chosen, some datas are required at the input in order to calculate the satellite’s position. These datas are stored within the Two Lines Element (TLE). They can be found on the internet but it is important to check if they are up to date whereas precision will be lost in the calculation. TLE are provided by NORAD (North American Aerospace Defence Command).

.

+Here is the TLE format (2 lines of 69 characters) :+ 

<pre>

AAAAAAAAAAAAAAA  b.b  c.c  d.d  e.e  f  RRR         KM x km

1 gggggU hhiiijjj kklll.llllllll +mmmmmmmm +nnnnn-n  ooooo-o p qqqqr

2 ggggg sss.ssss ttt.tttt uuuuuuu vvv.vvvv ddd.dddd xx.xxxxxxxxyyyyyz

</pre>

+Line 0 description :+

AAAAAAAAAAAAAAA : name of the satellite

b.b : length (meters)

c.c : width (meters)

d.d : height (meters)

e.e : standard magnitude

f : standard magnitude determination method (d = calculation ; v = observation)

RRR : equivalent radar section (meter square)

KM : altitude at apogee

km : altitude at perigee

Remark : Most of the time there is no line 0.

+Line 1 description :+

ggggg : Number within the U. S. Space Command (NORAD)

U : Classification (here U means Unclassified = not secret)

hh : Last two numbers of the lunching year

iii : lunch number of the year

jjj : one to letters pointing a piece of the lunch

kk : two last numbers of the year when these elements have been estimated

lll.llllllll : day and fraction of the day when these elements have been estimated

+ mmmmmmmm : half of the first derivative of the mean movement (revolution per day square), this stands for the acceleration and deceleration of the satellite

+ nnnnn-n : sixth of the second derivative of the mean movement (revolution per day cube)

ooooo-o : pseudo balistic coefficient, used by the SGP4 orbit propagator (1/terrestrial radius)

p : type of ephemeris

qqqq : number of this set of elements

r : cheksum (modulo 10)

+Line 2 description :+

ggggg :  Number within the U. S. Space Command (NORAD)

sss.ssss : orbit inclination with respect to the terrestrial equator (degrees)

ttt.tttt : right ascension of the orbit ascending node (degrees)

uuuuuuu : excentricity

vvv.vvvv : perigee argument (degrees)

ddd.dddd : mean anomaly (degrees)

xx.xxxxxxxx : mean movement (revolution per day)

yyyyy : number of revolution when these elements have been estimated

z : cheksum (modulo 10)

Here is an example of a TLE for the NOAA-19 : 

<pre>

1 33591U 09005A   15310.52866608  .00000161  00000-0  11260-3 0  9997

2 33591  99.0081 260.8643 0014724 126.2184 234.0350 14.11998019347577

</pre>

Here is some helpful remarks to interpret the TLE’s values :

* concerning the day and fraction of the day, also called epoch, when these elements have been estimated at line 1, the first two numbers are the last numbers of the year (15 stands for 2015 in the example). The next three numbers designate the number of the day in the year (310 represents November the 6th). Then the last numbers are the fraction of the day. By multiplying this decimal number by 1440 (the number of minutes in one day), we obtain the time of the day when these elements have been determined. This timeStamp reprensents the epoch. It is the moment where the satellite arrives at the ascending node. 

* When there is a « + » before the values it means that these values can be either positive or negative

* Concerning the excentricity at line 2, the decimal is assumed (0014724 means 0.0014724 in the example)

* Concerning the pseudo-balistic coefficent at line 1, the decimal is assumed and the last integer represents the minus values at the power of ten (11260-3 stands for 0.11260 x 10^-3)

It is even more important to have updated TLEs for satellite with orbit lower than 350 km and if it is often subject to manover such as the ISS (International Spatial Station)