B User Manual » History » Version 22

piat, charles ugo, 03/19/2015 08:05 PM

1 1 piat, charles ugo
h1. B User Manual
2 1 piat, charles ugo
3 18 piat, charles ugo
4 16 piat, charles ugo
p<. *Setting up of the antenna*
5 1 piat, charles ugo
6 17 piat, charles ugo
7 1 piat, charles ugo
8 22 piat, charles ugo
!antenna_feeder_.jpg! > First of all, we have to find a location to set up the antenna. The satellite is situated at 39° elevation and 169° 
9 22 piat, charles ugo
> azimuth. With a compass, we aim the direction of the satellite. It is better if the path between the satellite and the antenna is free of threes. > We  must have a clear area in front of the antenna to prevent any fading.  After having found a location, we must set up the antenna. The mobile > antenna is composed of two parts: the tripod with the feeder and the reflector of the antenna. The reflector is attached to the tripod thanks to > 5 screws.
10 20 piat, charles ugo
11 20 piat, charles ugo
12 13 piat, charles ugo
13 1 piat, charles ugo
14 1 piat, charles ugo
Next we have to aim the antenna to the good azimuth and elevation. There are two bubble spirit levels. The big one is used to adjust the planarity of the antenna; the bubble must be in the center of the spirit level. 
15 1 piat, charles ugo
16 6 piat, charles ugo
p=. !spirit_level_.jpg!
17 1 piat, charles ugo
18 1 piat, charles ugo
The second one is used to adjust the elevation of the antenna.  There is a compass attached to the tripod under the small spirit level. The elevation must be set to 39° and the bubble has to be put in the center of the spirit level.
19 1 piat, charles ugo
20 8 piat, charles ugo
p=. !compass_spirit_level_.jpg!
21 1 piat, charles ugo
 
22 1 piat, charles ugo
By now, using the compass we can aim the antenna to the satellite at 169° azimuth; we do a coarse pointing. 
23 1 piat, charles ugo
24 1 piat, charles ugo
*Establishment of the satellite link*
25 1 piat, charles ugo
26 1 piat, charles ugo
Next we can connect the modem to the feeder of the antenna, supplied it and connect it with an Ethernet cable to a PC. 
27 1 piat, charles ugo
28 6 piat, charles ugo
p=. !connections_modem_.jpg!
29 1 piat, charles ugo
30 1 piat, charles ugo
We can open a web page, and go to 192.168.100.1 the address of the modem. The web interface of the modem is displayed. Next we go to 192.168.100.1/install/ and we choose the cell of the location of the antenna (Toulouse is the cell #2). 
31 1 piat, charles ugo
32 7 piat, charles ugo
p=. !cell_.png!
33 1 piat, charles ugo
34 1 piat, charles ugo
To be sure of the cell and the coordinates of the satellite we can visit the web page : 
35 1 piat, charles ugo
36 2 piat, charles ugo
http://finder.tooway-instal.com/fixe/pages/index.html
37 1 piat, charles ugo
38 1 piat, charles ugo
and on the map we select our position and the finder will provide us the coordinates of the satellite and our cell number.
39 1 piat, charles ugo
40 6 piat, charles ugo
p=. !tooway_location.png!
41 1 piat, charles ugo
42 1 piat, charles ugo
Next we click on the next step. The modem will initiate the fine pointing. We have to rotate the reflector until reaching the satellite. The feeder emits an audible beep and when the antenna aims well to the satellite the beep becomes a continuous noise.  Now the antenna has locked the satellite. The modem will initiate the connection with the logging and we will obtain the internet access point. The establishment of the satellite link will take a few minutes to the modem. We have to wait, the web interface shows the progress.
43 1 piat, charles ugo
44 7 piat, charles ugo
p=. !scanning_.png!
45 1 piat, charles ugo
  
46 1 piat, charles ugo
*Connection to the Ka-Sat terminal*
47 1 piat, charles ugo
48 1 piat, charles ugo
We can connect the modem to the router via the Ethernet port number one. Back to the terminal there is a dedicated port to connect the modem.
49 1 piat, charles ugo
50 6 piat, charles ugo
p=. !Internet_port_.jpg!
51 1 piat, charles ugo
52 1 piat, charles ugo
We can turn on the Mini PC to launch the VoIP server.
53 1 piat, charles ugo
54 6 piat, charles ugo
p=. !on_off_nuc_.jpg!
55 1 piat, charles ugo
56 1 piat, charles ugo
There are some Ethernet cables available to connect computers to the router or we can use the WiFi corresponding to the Ka-Sat terminal.