SOURCEFORGE » RALF » 2014 Design and integration of a TooWay-based multi-purpose terminal

h1. Design and integration of a Ka-band terminal for on-the-field communication and measurements

!"system_complet.jpg"!

h1. Problem positioning

The satcom lab of Télécom Bretagne will soon be equipped with a TooWay/KA SAT facilities (bi-directional internet via satellite) that come in two flavours: a fixed antenna for access within the lab and a fly away antenna for on-the field access. On-the-field access is provided through a transportable terminal (see pictures below). The transportable terminal integrates a modem, networking facilities and end-devices (e.g., DECT/VOIP phones).

The objective of this project is to design and integrate the portable terminal taking into account all aspects: communication, networking and physical integration.

h1. Introduction

The transportable terminal provides services in inhospitable and isolated locations. In particular, our aim consists in bringing internet access through wired and WiFi IP network and to provide internal and external VoIP calls. The terminal is composed of two antennas (one fixe and another one mobile) and a modem to receive the signal from the Ka-Sat satellite and convert it into digital signal. One router, a Dect and some IP phones constitute the second part of the terminal to share the network between the internet access and the phone calls. In the first part of the project, we have identified the use cases and the corresponding network architecture (address and routing plan). Then we proceed with the integration of the networking and communication components in a ruggedized flight case. Later we have connected the transportable terminal to the fixe antenna to realize some tests and demonstrations of the overall system. The terminal is transportable with its mobile antenna and could be used during important and catastrophic events by the red cross for instance to keep them in touch with the head quarter.

The following is:

  * A list

  * Of bulleted items

    # This is a numbered sublist

    # Which is done by indenting further

  * And back to the main bulleted list

 * This is also a list

 * With a single leading space

 * Notice that it is rendered

  # At the same levels

  # As the above lists.

 * Despite the different indentation levels.

h1. Content

h2. I. Design of the Ka-Sat Terminal

h3. [[a. Study of User Cases]]

h3. [[b. Design of the Network Architecture]]

h3. [[c. Description of the Components]] 

h2. II. Networking and Communication between components

h3. [[a. Networking of components]]

h3. [[b. Establishment of the VoIP link]] 

h3. [[c. Quality of Service and Firewall]]

h2. III. Integration on the Ka-Sat Terminal

h3. [[a. Mounting of the components on the ruggedized flight case]]

h3. [[b. User Manual]]

h2. IV. Results and performance

h3. [[a. Network analysis]]

h3. [[b. Rain conditions]]

h3. [[c. Upgradeability]]

h2. V. Media

h3. [[a. Installation of the antenna]]

h3. [[b. Establishment of the satellite link]]

h1. Authors

Charles-Ugo PIAT

Loïc Veillard

h1. Supervisor

Laurent FRANCK, responsible for the Toulouse site of Télécom Bretagne.