SOURCEFORGE » RALF » 2014 Design and integration of a TooWay-based multi-purpose terminal

voici mon premier wiki

Router Configuration:

0)Problems/Errors during configuration:

PROBLEM 1: Couldnt connect to Internet Through router.
Definition: The ISAE lan has configured a proxy HTTP server.
Solution: In order to connect to the Internet we have to set proxy.isae.fr:3128 as the proxy http server.
Notes: If we want to connect to the router we have to put its IP as an exception to the proxy since the proxy server is after the microtik router.

ERROR 2: TX error to router:
Definition: Couldn't connect to Internet. Can ping other devices connected to router but can't connect to router.
Solution: Reset router config with the default pin code 1234

1) Quick set:
CPE - Short for "Customer Premises Equipment", this term is used to mean a "wireless station". It connects to a (wireless) network, like your computer would, but doesn't create its own (like an access point).
Home AP - Simple access point. One SSID, no VLANs, etc.
PTP Bridge - Used for setting up a "Point to Point" link. Tends to be used to extend a single network to another site that doesn't have a cable running to it.
WISP AP - "Professional" access point ("WISP" is "Wireless Internet Service Provider", I think). It can serve multiple SSIDs at once, has VLAN support (to have each SSID be its own, isolated network, maybe with firewalling and routing between them), and other advanced things.

2)Using the PoE port of the router to power the IP-DECT
port 1 may be used to PoE the IP-DECT 400.
As is the default port to gateway, we have to set the gateway in other port, or find if we can use other ports to PoE.
NOTE: After some time we have found that the PoE output is PORT 10#, we can use port 1# as gateway. Now we will check if the voltage of this output is appropriate for the IP-DECT 400
NOTE2: The power of the router is not enough to power up the server IP-DECT 400. We proceed to connect it with the tenda PoE Adapter 1500S.

3) Configuring the ROUTER to bypass the proxy while we are connected to ISAE network.
We will try to set proxy.isae.fr as the default web proxy. This way the router may be able to be updated.
As this task will be too long, we decided to update the router manually or after the satellite connection.

4) Finding the IP-DECT 400 and configuring it
4.1) Finding the IP addres and connecting to the webconfig portal:
We used the IP scan to detect all the used IP connected to the router and found the IP of the server IP-DECT 400.
We found that DHCP put the 192.168.88.251 this time. A priori, we will set all these IP static after.
We tried different pairs of defaults user/pass to access the web config page. Resulting that admin/admin was the correct one
4.2) finding the PIN code to connect the voIP terminals

page 2