Devlog » History » Version 9
Version 8 (Muguerza, Joaquin, 12/03/2014 08:18 PM) → Version 9/10 (Muguerza, Joaquin, 12/13/2014 04:12 PM)
[[Wiki|< Back to Main Page]]
h1. Devlog
In this section, every progress relevant to the project can be found, ordered in chronological order.
{UPDATE} *9/12/2014:* We verified that the message is being sent by the RF transmitter. Using a frequency analizer, we checked the presence of power in the frequencies specified by the FSK modulation.
*1/12/2014:* After successfully communicating using the UART interface, we connected an RF module to produce a beacon. Next step is receiving and decoding the radio message.
*28/11/2014:* Today we managed to communicate between the microcontroller and the PC via USB (using the FTDI Serial to USB converter).
*25/11/2014:* Today we programmed for the first time the microcontroller in the development board, and we successfully completed our first test: switching a LED using SalvoOS.
h1. Devlog
In this section, every progress relevant to the project can be found, ordered in chronological order.
{UPDATE} *9/12/2014:* We verified that the message is being sent by the RF transmitter. Using a frequency analizer, we checked the presence of power in the frequencies specified by the FSK modulation.
*1/12/2014:* After successfully communicating using the UART interface, we connected an RF module to produce a beacon. Next step is receiving and decoding the radio message.
*28/11/2014:* Today we managed to communicate between the microcontroller and the PC via USB (using the FTDI Serial to USB converter).
*25/11/2014:* Today we programmed for the first time the microcontroller in the development board, and we successfully completed our first test: switching a LED using SalvoOS.