Set-up and testing » History » Version 9
Version 8 (BASTIDE, Paul, 03/23/2016 12:11 PM) → Version 9/12 (BASTIDE, Paul, 03/23/2016 03:06 PM)
h1. Set-up and testing
h2. Test Set up
In order to test the good behaviour of our program, we should be using the In-Circuit-Debugger ICD3 to debug the program while on the Development Board.
However we never managed to make it work, so we had to resolve to an more simplist and less accurate way of testing the program.
We are reusing the LEDs set up in the [[Erasure codes for Cubesat missions:]] mission:]] project, and asking the program to turn on lighten the LEDS fwhen certain conditions are met. for seval conditions.
p=. !{width:75%}testSetUp.jpg!
Figure : Setup for testing phase
With that set up, we were able to determine that we were effectively determining a temperature which is converted to a 7-bits word.
Moreover we were able to ask the program a rough estimate of the temperature, which he gave us between 25 °C and 30°C.
What's more we were able to test with an spectrum analyser the fact that we were sending informations through the RF transmitter.
p=. !{width:65%}labtest.jpg!
Figure : Setup for testing phase with spetrum analyser
h2. Test Set up
In order to test the good behaviour of our program, we should be using the In-Circuit-Debugger ICD3 to debug the program while on the Development Board.
However we never managed to make it work, so we had to resolve to an more simplist and less accurate way of testing the program.
We are reusing the LEDs set up in the [[Erasure codes for Cubesat missions:]] mission:]] project, and asking the program to turn on lighten the LEDS fwhen certain conditions are met. for seval conditions.
p=. !{width:75%}testSetUp.jpg!
Figure : Setup for testing phase
With that set up, we were able to determine that we were effectively determining a temperature which is converted to a 7-bits word.
Moreover we were able to ask the program a rough estimate of the temperature, which he gave us between 25 °C and 30°C.
What's more we were able to test with an spectrum analyser the fact that we were sending informations through the RF transmitter.
p=. !{width:65%}labtest.jpg!
Figure : Setup for testing phase with spetrum analyser