Edit History

Sidebar »

Tests » History » Version 4

DE GENDRE, Raphaëlle, 03/23/2016 03:15 PM

1 1 DE GENDRE, Raphaëlle 
h1. Tests
2 2 DE GENDRE, Raphaëlle 





    3
    4
    DE GENDRE, Raphaëlle
    
   Once the receiver was implemented, we decided to see if we could receive the temperature on the receiver from our program running on the developement board. The set up was the following:





    4
    2
    DE GENDRE, Raphaëlle
    





    5
    2
    DE GENDRE, Raphaëlle
    
p=. !{width:75%}GlobalTestSetUp.jpg!





    6
    2
    DE GENDRE, Raphaëlle
    
Figure 1: Global test set-up 





    7
    2
    DE GENDRE, Raphaëlle
    





    8
    4
    DE GENDRE, Raphaëlle
    
   Once we made it run, we saw that we were transmitting values, and we manage to get results. 





    9
    3
    BASTIDE, Paul
    
However those results were not the one we wanted, since the values we got as a result we either 0°C or 31°C. The room were the system was set up was at ambient temperature.





    10
    3
    BASTIDE, Paul
    





    11
    2
    DE GENDRE, Raphaëlle
    
p=. !{width:75%}Receivedwaveform.jpg!





    12
    2
    DE GENDRE, Raphaëlle
    
Figure 2





    13
    3
    BASTIDE, Paul
    





    14
    4
    DE GENDRE, Raphaëlle
    
   Due to the limited amount of time we had to test our programs, we can only make hypothesis for the moment as to why it is not working. Until the day we are planed to present this project, we plan to look into : 





    15
    3
    BASTIDE, Paul
    
* the ADC acqisition and the buffer allocation





    16
    3
    BASTIDE, Paul
    
* the transmiting rate in the program





    17
    3
    BASTIDE, Paul
    
* the receiver optimization