PART3 » History » Version 34

« Previous - Version 34/83 (diff) - Next » - Current version
COLIN, Tony, 03/20/2016 01:26 PM


PART 5 : Implementation.

.......................


1 - Starting point.

a - Receiver scheme and milestones.

.......

b - Quid about LabVIEW.

.......

Input : GPS signal of sampling frequency 38.192 MHz at intermediate frequency 9.55 MHz from CD [1] under GNSS_signal_records/GPSdata-DiscreteComponents-fs38_192-if9_55.bin

c - Local C/A code generation.

Generation : CA_code.vi with subVI CA_generatorG1.vi CA_generatorG2.vi


2 - Acquisition.

.......

...........


3 - Tracking.

.......

...........


4 - Navigation Data decoding.

See the UML Diagram of Section 4 under : NavigationData.PNG.

a - Delimiting subframes.

The files involved are :
- FindPreamble.vi
- TestFindPreamble.vi
- GenerateFrame.vi
- ParityCheck.vi

Figure 5. : Cross-correlation between navigation frame and local preamble. Figure 5. : Subframes with index of delimitation.

b- Decoding ephemeris and information within the frame.

The files involved are :
- Ephemeris.vi
- BinaryArrayToDecimal.vi
- twosComp2dec.vi
- ParityCheck.vi


5 - Localization computation.

See the UML Diagram of Section 5 under : Localization.PNG

a - Satellite position.

The files involved are :
- SatellitePosition.vi
- TestSatellitePosition.vi
- Check_time.vi


Figure 5. : Interface with ephemeris as input and illustration of the satellite position.

b - Pseudoranges.

The file involved is :
PseudorangesComputation.vi

c - Least Square solution for position determination.

The files involved are :
- LeastSquarePosition.vi
- SatelliteRotationECEF.vi
- toTopocentric.vi
- CartesianToGeodetic.vi
- TroposphericCorrection.vi

6 - Complete UML Diagram of the receiver.


References :
[1] K. Borre, D. M. Akos, N. Bertelsen, P. Rinder, S. H. Jensen, A software-defined GPS and GALILEO receiver