Wiki » History » Version 15

piat, charles ugo, 02/17/2015 03:43 PM

1 2 VEILLARD GAROZ, Loïc
voici mon premier wiki
2 3 VEILLARD GAROZ, Loïc
3 4 VEILLARD GAROZ, Loïc
Router Configuration:
4 4 VEILLARD GAROZ, Loïc
5 6 VEILLARD GAROZ, Loïc
0)Problems/Errors during configuration:
6 5 VEILLARD GAROZ, Loïc
7 5 VEILLARD GAROZ, Loïc
PROBLEM 1: Couldnt connect to Internet Through router. 
8 5 VEILLARD GAROZ, Loïc
Definition: The ISAE lan has configured a proxy HTTP server. 
9 5 VEILLARD GAROZ, Loïc
Solution: In order to connect to the Internet we have to set proxy.isae.fr:3128 as the proxy http server.
10 5 VEILLARD GAROZ, Loïc
Notes: If we want to connect to the router we have to put its IP as an exception to the proxy since the proxy server is after the microtik router.
11 5 VEILLARD GAROZ, Loïc
12 5 VEILLARD GAROZ, Loïc
ERROR 2: TX error to router:
13 4 VEILLARD GAROZ, Loïc
Definition: Couldn't connect to Internet. Can ping other devices connected to router but can't connect to router.
14 1 VEILLARD GAROZ, Loïc
Solution: Reset router config with the default pin code 1234
15 5 VEILLARD GAROZ, Loïc
16 8 VEILLARD GAROZ, Loïc
PROBLEM 3: Proxy makes impossible communication wioth sip server
17 8 VEILLARD GAROZ, Loïc
Description: the proxy isae is not configured in the router neither in the IP-DECT 400 so it can register the phones with the sip server
18 9 VEILLARD GAROZ, Loïc
Solution
19 4 VEILLARD GAROZ, Loïc
20 9 VEILLARD GAROZ, Loïc
Problem 4: We are not able to connect the microtik router to a WIFI 
21 9 VEILLARD GAROZ, Loïc
Definition: The quick set is not working. It chrashes with almost all changes. So we need to update it.
22 9 VEILLARD GAROZ, Loïc
Solution: there is weird  work arround: 1) scan wifi interfaces 2) try to connect to any wlan 3)go to quick set and set disconnect 5) now quick set works and we can connect to a wireless network.
23 9 VEILLARD GAROZ, Loïc
Even with this the router is not able to update so we will do it using FTP
24 8 VEILLARD GAROZ, Loïc
25 9 VEILLARD GAROZ, Loïc
26 4 VEILLARD GAROZ, Loïc
1) Quick set: 
27 4 VEILLARD GAROZ, Loïc
    CPE - Short for "Customer Premises Equipment", this term is used to mean a "wireless station". It connects to a (wireless) network, like your computer would, but doesn't create its own (like an access point).
28 4 VEILLARD GAROZ, Loïc
    Home AP - Simple access point. One SSID, no VLANs, etc.
29 4 VEILLARD GAROZ, Loïc
    PTP Bridge - Used for setting up a "Point to Point" link. Tends to be used to extend a single network to another site that doesn't have a cable running to it.
30 4 VEILLARD GAROZ, Loïc
    WISP AP - "Professional" access point ("WISP" is "Wireless Internet Service Provider", I think). It can serve multiple SSIDs at once, has VLAN support (to have each SSID be its own, isolated network, maybe with firewalling and routing between them), and other advanced things.
31 4 VEILLARD GAROZ, Loïc
32 4 VEILLARD GAROZ, Loïc
2)Using the PoE port of the router to power the IP-DECT
33 4 VEILLARD GAROZ, Loïc
port 1 may be used to PoE the IP-DECT 400.
34 1 VEILLARD GAROZ, Loïc
As is the default port to gateway, we have to set the gateway in other port, or find if we can use other ports to PoE.
35 6 VEILLARD GAROZ, Loïc
NOTE: After some time we have found that the PoE output is PORT 10#, we can use port 1# as gateway. Now we will check if the voltage of this output is appropriate for the IP-DECT 400
36 7 VEILLARD GAROZ, Loïc
NOTE2: The power of the router is not enough to power up the server IP-DECT 400. We proceed to connect it with the tenda PoE Adapter 1500S.
37 1 VEILLARD GAROZ, Loïc
38 1 VEILLARD GAROZ, Loïc
3) Configuring the ROUTER to bypass the proxy while we are connected to ISAE network.
39 7 VEILLARD GAROZ, Loïc
We will try to set proxy.isae.fr as the default web proxy. This way the router may be able to be updated.
40 7 VEILLARD GAROZ, Loïc
As this task will be too long, we decided to update the router manually or after the satellite connection.
41 7 VEILLARD GAROZ, Loïc
42 7 VEILLARD GAROZ, Loïc
4) Finding the IP-DECT 400 and configuring it
43 7 VEILLARD GAROZ, Loïc
4.1) Finding the IP addres and connecting to the webconfig portal:
44 7 VEILLARD GAROZ, Loïc
We used the IP scan to detect all the used IP connected to the router and found the IP of the server IP-DECT 400.
45 7 VEILLARD GAROZ, Loïc
We found that DHCP put the 192.168.88.251 this time. A priori, we will set all these IP static after.
46 7 VEILLARD GAROZ, Loïc
We tried different pairs of defaults user/pass to access the web config page. Resulting that admin/admin was the correct one
47 1 VEILLARD GAROZ, Loïc
4.2) finding the PIN code to connect the voIP terminals
48 8 VEILLARD GAROZ, Loïc
It's configurable in the user page of the configuraiton web of IP-DECT 400
49 8 VEILLARD GAROZ, Loïc
4.3) Connect to a server SIP
50 8 VEILLARD GAROZ, Loïc
We can't see if the IP-DECT 400 can act as server VoIP. We will try to connect to an exteranl SIP server
51 8 VEILLARD GAROZ, Loïc
Problem encountered: PROBLEM 3
52 9 VEILLARD GAROZ, Loïc
53 9 VEILLARD GAROZ, Loïc
4.4) updating the router by FTP
54 10 VEILLARD GAROZ, Loïc
We reached to updated the router to the 6.26 version. We stil have the same problems althougth.
55 9 VEILLARD GAROZ, Loïc
56 11 VEILLARD GAROZ, Loïc
4.5) Configuring Microtik
57 11 VEILLARD GAROZ, Loïc
blablabla
58 11 VEILLARD GAROZ, Loïc
59 11 VEILLARD GAROZ, Loïc
4.6) DHCP static directions for IP-DECT 400 (192.168.88.251) and the miniPC freePBX server (192.168.88.253)
60 11 VEILLARD GAROZ, Loïc
61 11 VEILLARD GAROZ, Loïc
4.7) Stablishing internal connection:
62 11 VEILLARD GAROZ, Loïc
63 11 VEILLARD GAROZ, Loïc
 Connexion interne:
64 11 VEILLARD GAROZ, Loïc
Proxy: 127.0.0.1 (localhost)
65 11 VEILLARD GAROZ, Loïc
66 11 VEILLARD GAROZ, Loïc
KWS is a dispositive with the same function as the IP-DECT 400 and it has a better documentation:
67 11 VEILLARD GAROZ, Loïc
http://support.spectralink.com/sites/default/files/resource_files/KIRK_Wireless_Server_300_6000_Asterisk_Technical_Bulletin_0.pdf
68 11 VEILLARD GAROZ, Loïc
69 11 VEILLARD GAROZ, Loïc
5)Configuring the mini-PC
70 7 VEILLARD GAROZ, Loïc
71 7 VEILLARD GAROZ, Loïc
72 7 VEILLARD GAROZ, Loïc
73 12 piat, charles ugo
6) install the asterisk sip setting to connect the voip server on the DECT
74 12 piat, charles ugo
go to : http://mirror.freepbx.org/modules/release/2.9/
75 13 piat, charles ugo
-select the lettest sipsetting.
76 13 piat, charles ugo
-upload it in module admin. 
77 13 piat, charles ugo
go to : http://www.freepbx.org/support/documentation/howtos/howto-setup-a-remote-sip-extension
78 13 piat, charles ugo
It explains how to configure the sip settings to do connect the VOIP server to others devices. 
79 12 piat, charles ugo
80 14 piat, charles ugo
VERY IMPORTANT on the VOIP server, when adding new extension (new phone) we must cancel the secret field (let it blank) in the part Device options. 
81 15 piat, charles ugo
(systematicaly each time we change the config of the phone).
82 3 VEILLARD GAROZ, Loïc
[[page 2]]