SOURCEFORGE » RALF » 2016 NOAA: receiving weather images

+*Previous :*+[[Receiving antenna building]] +*Next :*+[[Conclusion]]

h1. APT images reception

Now we know that our antenna is receiving correctly the APT signals, we want to decode this signal and to display the weather images. At first, we used a specific software WXtoImg which demodulate directly the APT signal and do automatically all the processing to display APT images. And then we did all the demodualtion and processing by ourself using LabView. But before, we will see how we were able to track NOAA satellites and to know when were the best passes over our city.

h2. WXTrack

WXTrack is a software that was available in our laboratory. It allows to track any NOAA satellites and to get many information about the passes above a city, the duration of the pass, etc. The software interface looks like this:

p=. 

!{width:90%}WXtrack.jpg!

We can see many information on the bottom part,about the next pass, the time and the duration, the maximum elevation angle, the current altitude and range of the satellite. We can also get the maximum elevation angle during one pass which is important for the quality of received signal. Indeed, the more the elevation angle is high, the better the quality is, as the satellite is closer to our antenna when the elevation is high.

By tunning some parameters about the minimum elevation angle we want, the minimum duration on the visibily for example, the software can also provide a list of satellite pass like this one which is very useful: 

p=. 

!{width:90%}List.jpg!

h2. WXtoImg

h2. LabView

+*Previous :*+[[Receiving antenna building]] +*Next :*+[[Conclusion]]