Receiving antenna building » History » Version 12

SCHNEIDER, Joris, 03/23/2017 10:57 PM

1 11 SCHNEIDER, Joris
+*Previous :*+ [[Receiving antenna design]]
2 11 SCHNEIDER, Joris
3 1 SCHNEIDER, Joris
h1. Receiving antenna building
4 1 SCHNEIDER, Joris
5 1 SCHNEIDER, Joris
h2. List of components
6 1 SCHNEIDER, Joris
7 1 SCHNEIDER, Joris
h2. Assembly
8 1 SCHNEIDER, Joris
9 5 SCHNEIDER, Joris
h2. Testing
10 2 SCHNEIDER, Joris
11 4 SCHNEIDER, Joris
In order to ensure the fact that the antenna is functioning well, we made several tests.
12 4 SCHNEIDER, Joris
 
13 4 SCHNEIDER, Joris
At first, we had to ensure that the cables will really bring the phase shift of a Pi/2 between opposite dipoles. To do so, we plugged in the cables to a signal generator. We generated a sine signal at 137MHz and observed on an oscilloscope the signal at the output of two cables which have a different length as explained in the design part. Here you can find pictures of the signal generator and the observed signal at the ouput.
14 4 SCHNEIDER, Joris
15 1 SCHNEIDER, Joris
p=. 
16 4 SCHNEIDER, Joris
!{width:60%}PhaseShift2.jpg!
17 4 SCHNEIDER, Joris
!{width:60%}PhaseShift.jpg!
18 4 SCHNEIDER, Joris
19 4 SCHNEIDER, Joris
We see that the phase shift between the two cables is about Pi/2.
20 4 SCHNEIDER, Joris
21 1 SCHNEIDER, Joris
Then, at each step during the assembly, we tested each connection with a multimeter in order to ensure that all connections are correctly done.
22 5 SCHNEIDER, Joris
23 5 SCHNEIDER, Joris
h2. Validation
24 4 SCHNEIDER, Joris
25 10 SCHNEIDER, Joris
Even if we tested the cables and all the connections, we need to make sure the antenna is really able to receive APT signals. So, we plugged in the coaxial cable of our antenna to a radio receiver. As an APT signal is audible once demodulated in frequency, we can determine easily if the antenna is correctly working or not. To know when a satellite pass above Toulouse, we used a tracker software called WXTrack. Thanks to this software, we are able to know when each NOAA satellite will be visible. 
26 1 SCHNEIDER, Joris
27 10 SCHNEIDER, Joris
To validate our antenna, we only had to turn on the radioreceiver to the correct frequency depending on the satellite which is available and listen to the signal directly at the output of the receiver. Here is the radio receiver configured on the NOAA 19 frequency (137.1MHz).
28 10 SCHNEIDER, Joris
29 1 SCHNEIDER, Joris
p=. 
30 10 SCHNEIDER, Joris
!{width:70%}RadioReceiver.PNG!
31 9 SCHNEIDER, Joris
32 9 SCHNEIDER, Joris
33 10 SCHNEIDER, Joris
During our tests, we could correctly hear the specific signal. To have an idea, an example of audible APT signal is available in the files list (florida.wav). You can download it to hear the APT signal.
34 11 SCHNEIDER, Joris
35 12 SCHNEIDER, Joris
+*Next :*+ [[APT images reception]]